Step 1 — Place the required amount of dental powder on a clean, dry glass mixing slab.

Step 2 — Add the recommended number of drops of liquid or catalyst alongside the powder on the slab, as per the material manufacturer's instructions.

Step 3 — Hold the Jenin Glass Pestle firmly between your fingers for a comfortable and controlled grip.

Step 4 — Begin incorporating the powder into the liquid in small increments using the pestle.

Step 5 — Use circular or figure-eight strokes to spatulate the material evenly across the slab.

Step 6 — Continue mixing until a smooth, homogeneous, and lump-free consistency is achieved.

Step 7 — Check the mix for the correct consistency as required for the specific dental material being used.

Step 8 — Use the mixed material immediately for the intended clinical or laboratory procedure.

Step 9 — After use, wipe the pestle immediately with a clean gauze or tissue to remove residual cement before it sets hard.

Step 10 — Disinfect or sterilize the pestle as per your clinic's infection control protocol before storing or reusing.