Step 1 — Clean and isolate the cavity preparation using cotton rolls or rubber dam.

Step 2 — Remove debris and gently dry the cavity without over-drying the dentin.

Step 3 — Dispense the required quantity of powder and liquid according to the recommended mixing ratio.

Step 4 — Mix the powder and liquid on a mixing pad or glass slab using a spatula until a smooth consistency is achieved.

Step 5 — Apply the mixed cement directly into the prepared cavity.

Step 6 — Adapt the material properly to cavity walls to ensure good marginal sealing.

Step 7 — Allow the material to set completely.

Step 8 — Finish and polish the restoration if required.