Step 1 — Clean and isolate the cavity preparation using cotton rolls or rubber dam.

Step 2 — Place the capsule into a dental capsule activator to activate the material.

Step 3 — Insert the activated capsule into a dental amalgamator for mechanical mixing.

Step 4 — After mixing, place the capsule into a capsule applicator.

Step 5 — Dispense the mixed cement directly into the prepared cavity.

Step 6 — Adapt the material carefully to the cavity walls to ensure proper marginal sealing.

Step 7 — Allow the material to set according to the recommended setting time.

Step 8 — Finish and polish the restoration if necessary.