Charging the Device:

• Place the motor handpiece on the charging base.
• Ensure that the power adapter is connected to the charging base and plugged into a power outlet.
• The LED indicator on the charging base will illuminate, indicating that the device is charging.
• Allow the device to charge fully before use.

Assembling the Components:

• Attach the contra-angle to the motor handpiece firmly.
• Ensure that the contra-angle is securely fastened to avoid any movement during use.

Powering On the EndoMatic:

• Press the power button on the motor handpiece to turn on the device.
• The LED display will activate, indicating that the device is powered on and ready for use.

Adjusting the Settings:

• Use the buttons or controls provided on the device to adjust the speed and torque settings according to your requirements.
• Refer to the user manual for detailed instructions on adjusting specific settings.

Using the EndoMatic for Root Canal Preparation:

• Select the appropriate file or instrument for root canal preparation.
• Gently insert the instrument into the canal, ensuring it is properly positioned.
• Activate the device by gently pressing the foot pedal or using the designated controls.
• Carefully maneuver the contra angle to navigate and prepare the root canal as needed.
• Monitor the progress and adjust the settings if necessary for optimal results.

Using the EndoMatic for Canal Length Measurement:

• Ensure that the built-in electrode of the contra-angle is in contact with the canal.
• Activate the measurement mode by selecting the appropriate setting on the device.
• Slowly insert the contra-angle into the canal until the desired measurement is obtained.
• Read the measurement displayed on the device's LED display.

Powering Off the EndoMatic:

• Once you have completed the treatment or measurement, deactivate the device by pressing the power button on the motor handpiece.
• Ensure that the device is turned off before disconnecting or storing it.