Setup and Preparations:

• Ensure the unit is placed on a stable surface near the dental workstation.
• Connect the power supply to the unit and plug it into a suitable electrical outlet (100V-240V, 50Hz/60Hz).
• Check that the foot pedal is connected securely to the unit.
• Fill the water reservoir with a suitable sterile saline solution.
• Insert the desired tip securely into the handpiece.

Power On:

• Switch on the Surgic Smart Piezosurgery Unit using the power button.
• Verify that the unit displays the correct software version (BoneSurgical4-V1.0.0).

Adjust Settings:

• Set the desired operational mode on the control panel, if applicable.
• Adjust the power level using the appropriate controls.

Sterilization:

• Ensure that the applied parts (tips) are properly sterilized before use. Follow recommended sterilization protocols.

Positioning and Operation:

• Position the handpiece with the selected tip in the desired area for the surgical procedure.
• Use the multi-function foot pedal for control. Press to activate and release to deactivate.

Perform the Procedure:

• Apply gentle pressure and move the handpiece in a controlled manner over the target area.
• Monitor the progress of the procedure and adjust settings as needed.

Monitor Water Flow:

• Ensure a steady flow of water to the tip for cooling and irrigation during the procedure. Adjust as necessary.

Post-Procedure:

• After completing the procedure, switch off the unit using the power button.
• Disconnect the handpiece and remove the used tip for proper disposal or re-sterilization.

Cleaning and Maintenance:

• Clean the handpiece and unit according to the manufacturer's guidelines.
• Empty and clean the water reservoir after each use.

Shutdown:

• Switch off the Surgic Smart Piezosurgery Unit and unplug it from the electrical outlet.