Key Specifications
Hydrorise
Putty
Regular-body
Light-body
ISO 4823
Type 0 Putty Consistency
Type 2 Medium-bodied Consistency
Type 3 Light-bodied Consistency
Mixing ratio (Base:Catalyst)
1:1 , 5:1
1:1
1:1
Strain in Compression (Min.–Max.)
1 – 3%
3 – 5%
3 – 5%
Recovery from deformation
>99,0%
>99,5%
>99,5%
Linear dimensional change (24hrs)
<0,20%
<0,20%
<0,20%
Hardness “Shore A”
60±2
45±2
45±2
Direction To Use
- All standard and/or special trays can be used, provided they are rigid and non-deformable
- Proper adhesion of the material to the impression tray is essential to avoid errors, especially during removal from the mouth. To ensure a strong bond, make sure that the adhesive is appropriate for the type and material of the tray.
- Hydrorise putty (mixing ratio 1:1) -
- Take the required amounts of both components out of the tubs using the color-coded dosing scoops.
- Mix identical proportions of hydrorise putty base and catalyst until you obtain a homogenous mix with no streaks in it ( 30 seconds mixing time)
- Hydrorise light body, regular body (cartridge version 50ml, 1:1)
- Assemble the dispensing gun and cartridge
- Before fitting the tip, make sure that the two components (base and catalyst) flow out evenly by pressing gently on the dispenser lever and extruding a small amount of material. Remove this material before proceeding.
- Fix the mixing tip and the optional intraoral tip.
Packaging
Additional Info
Country Of Origin: Italy
Manufacturer: zhermack
